Here is a list of the current machinery which is surplus to our needs at Rhodds’s Farm. If you cannot see what you are looking for, or have any specific requirements or questions please eMail or call 07779 85 43 63; further photos are also available.

Surplus machinery is often also placed on eBay, click here to view our items currently advertised on there. Rhodds's Farm often is assisted by LBG Machinery, their items can be viewed on their website here.


Somerset by Denings of Chard Tractor Mounted Saw Bench

Small tractor mounted saw bench manufactured by the well known Denings of Chard. Well built tool – save a lot of back breaking work with a chainsaw getting logs ready for fire! Beauty of having a bench mounted on the tractor is that you can take it anywhere, rather than having to take the wood to the saw bench. Nice compact size means that it would easily by driven by a Fordson Dexta, MF35 or even a Grey Fergy, compact tractor etc etc. Mounted on Cat 1 or 2 linkage. Triple vee-belt drive and lever to tighten belts for use. Four adjustable feet. Complete with planking guide and roller. Approx 2ft diameter blade. Complete with full PTO shaft. Blade turns over nicely and looks fine, bearings also feel fine. May benefit from a sharpen in the future - although perfectly usable as is. Doesn’t appear to have had a hard life or done a lot of work. Last used on the back of MF 35 relatively recently. Frame has had a couple of repairs in the past – but nothing major. Please note that this does not comply with HSE legislation!! £SOLD.


Tractor Mounted Transport/ Link/ Carry Box

Well built transport box. Approx size overall width 71”, 29” deep (with tailgate closed), 22.5” high at the front and 12” high at the rear. Complete with hinged removable tailgate. This is easily removed by 2 pins. Ideally suited to compact tractors, as well as larger tractors. Cat 1 linkage pins. A transport box is about the most useful item you can have around a small holding or farm yard. Ideal for moving hay and straw, livestock feed, manure, logs, grass mowing, garden waste etc etc. Unlike some of the modern transport boxes available, which are not very deep, this one is suitable for moving conventional bales (with the tailgate removed). Ready for work or play, and is in good condition. Has had a recent coat of paint, and has not been used since. It has only been put on the tractor for the pictures. Nice solid condition and ready for work. Tail gate is a little knocked about but perfectly usable! £185.


Mini Digger 12 Inch Digging Bucket

12in digging bucket complete with very good teeth and side cutters. To fit an approx 120-125mm arm with approx 35mm pins. In excelletn used condition and doesn't appear to have had a lot of use. I can send via Palletline – please contact me with your postcode for a quote. £85.


Massey Ferguson MF 6.00-36 Row Crop Wheels and Tyres

Pair of Massey Ferguson row crop wheels. Ideal for use on sprayer tractor or a yard tractor (make turning in tight spaces easier). Can also be handy to fit on a tractor during restoration, or as a spare set of wheels. Removable MF tractor centres – will fit a range of tractors. Were removed from an MF 30 drill. Rims are in good straight order. Good tread – see pics. Both tyres appear to hold air and have good tread. Perfectly usable, tyres are however cracked – see pics. I can send via Pallet Line – please contact me with your postcode for a quote. £SOLD.

Bale Spike to fit Massey Ferguson MF 40 Loader

Bale spike to fit MF40 power loader, based on a MF muck fork, which has been reversed and had a long spike added. Could easily be turned back into muck fork. Will also fit MF80 loaders with a single tipping ram. Could easily be altered to fit other loaders, has plates where other loader brackets have previously been fitted. 28in main spike. 24in lower spike (loose) to stop bale spinning. In very order and hasn’t seen a lot of use since being made. I can strap to a pallet for delivery by PalletLine. Please contact me with your postcode for a quote. £100.


Large Tractor Mounted Transport/ Link/ Carry Box

Extremely well built transport box – you will not find a commercially manufactured box that comes anywhere near to the quality/ strength of this one. Approx size overall width 7ft 7in, 4ft 2in deep (with tailgate closed), 3ft 8in high at the front and 23in high at the rear. Complete with hinged tailgate, this fold down to form a ramp (see pics), to allow you to wheel in wheel barrow/ sack barrow/ mower etc etc. Tail gate could also be used to increase load area with the addition of two small pieces of chain. Ideally suited vintage (such as Fordson Major, MF 135 etc etc)/ larger tractors. Make no mistake, this is a big box! Cat 2 linkage pins using sleeves, so could easily be reduced to cat 1 pins. A transport box is about the most useful item you can have around a small holding or farm yard. Ideal for moving hay and straw, livestock feed, manure, logs, grass mowing, garden waste etc etc. Could have seats added and be used for tractor road runs. Unlike many of the modern transport boxes available, which are not very deep, this one is suitable for moving a good stack of conventional bales. In excellent condition. Hasn’t had much use at all since manufacture. Would look very smart with a top coat in your tractors colours. £POA.

Ferguson R-DE-20 Potato Ridger

 

IMAGE TO FOLLOW

 

Fergy ridger in good used condition. Will go straight to work. £POA.


Ferguson/ Massey Ferguson MF Post Hole Borer

Genuine original Ferguson /MF Implement – I am not sure whether it is a Fergy or an early MF example. Complete with 12in auger and original PTO shaft with slip clutch. Last used on MF 35, so has the larger 1 3/8 PTO end – would be easy to change to 1 1/8 Fergy size. Unusual implement – would be a good addition to a Fergy/ MF collection. Bearings all feel fine and all turns as it should, but we haven’t tested. Has had a plate welded between the arms to improve stability – could easily be removed. The tractor ends require a little straightening. Would go to work as is. With a little time, this could easily be restored for taking to shows behind a restored Fergy. £SOLD.


9ft Mounted Chain/ Grass Harrows

Approx 9ft working width, overall width a little more at 9ft 7in. Ideal for smaller tractors – we have had it hitched to our Fergy and it handled it fine. Excellent for rejuvenating grassland, pulling out dead thatch, moss etc and generally improving the quality of the grass. Also brilliant for pulling high spots into lows (where those horses have been over the winter!) and leveling ground. Very versatile bit of kit, could also be used for harrowing in seed, fertiliser, leveling ménages, driveways, etc, etc. By being mounted, harrow is easily moved between fields and can work right into the field corners – something you cannot do with a trailed set. Excellent, strong frame. Will go straight to work – we will be using as soon as the ground dries out a little (if it hasn’t been sold!). Chains are all in generally excellent order. Points show minimal wear and are all 2.5-3in long. £POA.


Massey Ferguson MF40 Tractor Loader for MF35/ 135

 

 

IMAGE TO FOLLOW

Very popular loader with brackets to fit either MF35 or MF135. Ideal for use around the small holding, stables or farm. With brackets, booms, bucket, relatively new pipework, parking stands, some pins and some bolts. Only bucket included, but other attachments often come up. Parking stands mean that it is easy to remove the loader from the tractor when not in use. Could easily be altered to fit other MF tractors or even other makes. Booms have point for tipping ram, to turn into a power loader. All in generally good order but does need a tidy. Brackets all look fine, and don’t show much wear at all. Bucket has some very small holes – perfectly usable as is, alternatively would be straight forward to patch. The bucket is one from a MF35 loader, that has been modified to fit. The ends of the arms need new clips fitting (parts of the old ones are included). I have not tested the rams but all looks fine. £220.

Bale Spike for Tractor Loader

Single bale spike to fit power loader with approx 43in between the arms. Could easily be altered to fit other loaders, handlers, or even three point linkage etc. Excellent 42in spike which is tight and no play. Could easily have additional spikes added. In generally very good order. The bottom loader brakets have had the odd knock – but perfectly usable as is. I can strap to a pallet for delivery by PalletLine. Please contact me with your postcode for a quote. £100.

Wessex Three Leg Ripper/ Subsoiler/ Culitvator

Compact chisel plough/ subsoiler complete with three removable legs. Ideal for compact or lower HP tractor, I have even used on the back of my Fergy. Cat 1 Linkage, bottom pins are bolted on and can easily be changed or reversed. The pins have been borrowed for another tool – new ones will be fitted before collection. Three top link points to alter angle of work. Very good reversible points and legs, all showing minimal wear. Points have not been reversed yet. Suitable for a wide variety of uses, including working land instead of ploughing, breaking down ploughed land, helping drainage, breaking up hard pan caused by tramlines etc, making small trenches, pulling out roots - I have used one of these on my Fergy to clear hedge roots out of a new flowerbed and raise deep wheelings on one of our paddocks. Ideal for a landscape gardener, as it is easy to take off trailer or out of pick-up by hand, and is ideal for working small areas of land/ gardens, prior to turfing etc. Very flexible tool comes complete with three legs, which clamp onto the main frame, so working width can be altered or used with 1 or 2 legs. Part of a Wessex designed system in which you could fit pallet forks, single deep subsoiler leg, ripper tines (as included), cultivator legs etc to the same main frame. Whilst the other attachments are not included in the auction, I am sure they could be sourced/ others modified to fit. Excellent condition, has sat around more than been used – will look very smart with a coat of paint! I can strap to a pallet for collection by Pallet Line – please contact me with your postcode for a quote. £SOLD.

Lely Tractor Mounted Fertiliser Spreader
Smaller size single disc spreader, ideal for use on smaller fields and smaller tractors- excellent size for grassland and pony paddocks. In good used condition, all sound and doesn’t appear to have had a lot of use. Metal hopper in good condition, this can be removed for cleaning (clip may just need freeing off). Could be used for spreading fertiliser, or a wide variety of seed, including grass seed or even salt. Controls are easy to operate and reach from the tractor seat – I will put a new section of rope on for the trip mechanism before the end of the auction. Cat 1 and 2 linkage, and ideal for most smaller tractors such as Fergy, MF 35, MF135, Fordsons or compact tractors with linkage. Very well built tool – unlike many of the cheaper smaller spreaders available today. Complete with full PTO shaft. Rear drawbar – tow your harrows behind and cover two jobs in one pass! All in all a good usable tool. Hasn’t been used for a while. Bearings etc all feel fine, turns over fine, but I have not tested. PTO will need freeing off as wont slide at the moment. As it has sat for a while the adjuster will need freeing off (noting major) and all mechanisms a good oil. The ends of some of the fins have got a little thin - not enough to effect operation. I can strap to a pallet for collection via Pallet Line – please contact me with your postcode for a quote. £SOLD.

Massey Ferguson MF 723 Early Plough

This is an unusual version of the MF plough as it has a Ferguson badge – which suggests that this was a very early version of this type of plough. The serial number also suggests this, which appears to be: NOO6001. Some traces of red and grey paint visible. Is for restoration – requires two new boards and a new point, as well as general tidying. I acquired this some time ago with the good intention of restoring it, however, I have not had time to get around to it. £SOLD.

Bucket to fit David Brown DB Loader

Believed to be made by David Brown for their trip loaders. Overall width 4ft – so will fit 4ft loader arms. May fit other makes of loaders. Could easily be altered to fit power loaders. Would benefit from some plating – see pics – could be used as is, but would be straight forward to repair as all straight edges. I can send via Pallet Line – please contact me with your postcode for a quote. £110.

8ft Rib/ Cambridge Grass Roll

Rib roll perfect for use with smaller hp tractor - We have used behind our Fergy. I would have thought you’d need approx 20hp to two this roll. Approx working width 8ft. Overall width a little more. Good heavy roll with approx 20in diameter rings. Perfect for paddocks, grassland or even on ménages. I this type of roll my grassland and much prefer them to a flat roll, they do a very good job of leveling lumps and bumps, particularly in the gateways and rolling in grass seed etc. Also very good for breaking down ploughed land. Has hinged pin drawbar, but it would be straightforward to make rigid or add a 50mm ball hitch for use behind other vehicles. Has rear drawbar to tow harrows behind and do two jobs in one pass, this is what we have done in the past! Roll is in good used order and will go straight to work. Rings have some play in them, could be spaced out, but perfectly usable as is. Drawbar has had some repairs in the past but has been well done – see pics. £185.


Ransomes 2 Leg Subsoiler/ Ripper

Two leg light duty subsoiler/ ripper/ cultivator - believed to be an old Ransomes based tool. The legs clamp on the frame so their position can be altered to suit tractor. Ready to go to work. Previously used for lifting/ breaking up tramlines down to approx 12in. Ideal for a wide variety of uses including breaking down small areas of ploughed land, helping drainage, breaking up hard pan caused by tramlines etc, making small trenches, pulling out roots - I have used a similar (smaller) tool on my Fergy to clear hedge roots out of a new flowerbed and raise deep wheelings on one of our paddocks. Ideal for lower HP tractors – was previously used behind a 2wd MF. Currently Cat II linkage, but Cat I pins could easily be added. Complete with two new and unused spare bolt on points and bottom link pins. In generally good used order. Plenty of life left in current points. One leg has had a repair towards the top a long time ago – but this has been carried out well and shouldn’t prove a problem in the future. Main frame has a slight bow in it – see pics, no cracks – just a result of many years of work. Perfectly usable as is, alternatively frame could be strengthened and other/ more legs added. £175.

8ft 6in Seed/ Grass Harrows
Approx working width 8ft 6in. Ideal for grassland, I use a set and find they do a much better job than chain harrows. Brilliant for leveling and rejuvenating grassland where horses/ cattle have been, spreading droppings, pulling out moss, dead thatch etc etc. Also useful for leveling ménages, driveways etc etc. Good size set, easily pulled by a compact tractor upwards or even a large 4wd quad, 4x4, Gator etc. 3 sections mean that size/ working width could easily be reduced. Complete with pommel tree and good length of tow chain. I like to harrow my grassland with this type of harrow, broadcast some more grass seed on and then harrow in a different direction to push the seed in and find it works well. Will go straight to work. Good used condition - plenty of life left. If they don’t sell, it is likely we will hang onto them as a spare set for use on our grassland. I also have an 8ft roll available, which the harrows can be towed behind. We find towing the harrows behind the roll works well and is an excellent way of doing two jobs in one pass. £SOLD.

Glasdon Snowdozer Forklift Mounted Blade/ Pusher/ Grader
Well made simple tool by Glasdon, called the Snowdozer. Designed for clearing snow from car parks, drives, roads ect etc. But would also be ideal as yard scraper, grader blade, leveling field gateways, ménages, sand schools etc, making and leveling farm tracks etc etc. Working width approx 5ft 9in, height approx 17.5in. Hard plastic blade is approx 3/4in thick, and is reversible. Blade is angled 25 degrees to move material. Fits on the pallet tines of any loader, forklift or telehandler. Has two screws to grip tines (these will just need freeing off as hasn’t been used for a while). Good used condition – appears to have sat about more than it has been used. Further details and spares readily available from the manufacturer: www.glasdon.com. £220.

Single Leg Ripper/ Subsoiler
Ideal for smaller tractors, I have used it on the back of my Fergy. Cat 1 and 2 Linkage. Well built farm made tool. Good wearing metal – has had some hard facing on point and leg. Suitable for a wide variety of uses, including breaking down small areas of ploughed land, helping drainage, breaking up hard pan caused by tramlines etc, making small trenches, pulling in water pipe, pulling out roots - I have used a similar one on my Fergy to clear hedge roots out of a new flowerbed and raise deep wheelings on one of our paddocks. Ideal for a landscape gardener, as it is easy to transport/ move about. I can strap to a pallet for collection by Pallet Line – please contact me with your postcode for a quote. £160.

Large Rib/ Cambridge Grass Roll

 

IMAGE TO FOLLOW

 

 

Copyright Rhodds's Farm 2012

Design By J W D / Hosting By Fasthosts